I cannot tell you how relieved I am to write this post because at long last I have a good answer for those of you who have a smart meter installed at your home against your will.
Smart meters are being used by the majority of utility companies today, and while a convenient cost cutting measure for them, they are a concentrated source of electromagnetic radiation (EMF) for consumers. Smart meter radiation is of a similar frequency to WiFi, cordless phones and cell phones. However, while of a similar frequency to these other devices, smart meters transmit at much higher power and concentration so much so that consumers are starting to note chronic health effects from having them installed such as frequent headaches, inability to concentrate, lack of quality sleep, anxiety and more.
As awareness of the dangers of excessive EMF exposure grows, more and more people are realizing that the smart meter attached to their house is contributing in a big way to their health challenges especially if the smart meter is installed near the bedroom area of the home as these devices transmit on a 24/7 basis.
I’ve been blogging about the dangers of smart meters for several years, and until now the only concrete answer I had for people was to navigate the utility company bureaucracy and attempt to get it removed in favor of an old fashioned analog meter. Unfortunately, this approach is proving nearly impossible for the majority of people as the utility companies don’t really seem to care much about the health of their customers. Even worse, some power companies are flat out lying to their customers by insisting the meters are not smart meters at all, but less problematic AMR meters (Automated Meter Reading) which transmit one-way for very short distances and are not connected to the SmartGrid. While not true for all power companies, at least two that I know of are definitely employing the deny and divert approach when dealing with smart meter inquiries and complaints from their customers.
For those stymied by the power companies, clunky home approaches for blocking the smart meter EMFs were an option such as placing aluminum foil or some other form of metal shielding on the inner wall where the device was installed. This solution proved impractical in many cases and didn’t work very well for some people in alleviating symptoms. This is because the metal reflects rather than blocks the smart meter radiation which can unintentionally redirect or concentrate it to an area you don’t want it to go.
At Last! A Solution to Smart Meter Radiation
While reflecting smart meter radiation has proven to be an unreliable approach, there is a new device available that very effectively blocks it instead.
The device is called a Smart Meter Guard (check it out here) and it has been proven to cut 98% of the radiation from a smart meter! Better yet, the power company won’t balk if you use it as long as you don’t break the security seal (don’t EVER do this!). My friend Beth from Minnesota emailed me about it recently as she was informed about this new device by a building biologist who works for the company Intentional Environment.
There are now two other less expensive competitive products, the Smart Meter Cover (available here) and the Smart Meter Shield (available here).
How the Smart Meter Guard Works
These products work using a technology called a “Faraday cage”, named after the English scientist Michael Faraday, who invented them in 1836.
A Faraday cage is a metal enclosure made out of a conductive material (like metal) or a mesh of the same type of material. It serves to block external electric fields by channeling electricity through the mesh, providing constant voltage on all sides of the enclosure. Since the difference in voltage is the measure of electrical potential, no current flows through the space. This scientific phenomenon is applied to protect electronic equipment from lightning strikes.
Here’s how a Faraday cage works with regard to a smart meter. Your electrical utility box is made of and completely surrounded by metal. All of this metal is grounded and poses no health threat. However, the glass part of the smart meter is not grounded and this is where the radiation is transmitted and it is not straight out from the glass. It radiates outwardly in all directions including backward into your home. Once the Smart Meter Guard made from 316 stainless steel mesh and stainless steel support ribs (made in the USA) is installed, it covers the glass portion of the smart meter which is not grounded effectively containing 98% of the high frequency radiation so that it cannot escape even from the backside of the smart meter.
The 1% to 2% of the radiation that is not contained is sufficient to transmit a signal for about a mile or so (versus 30 miles without a Smart Meter Guard). Since most power company data receiving stations are less than a mile away, chances are very good that the utility company will continue to receive the signal it needs. As of this writing, no complaints have been received by the company that makes the Smart Meter Guard that power companies are not getting the signal from homes with a Smart Meter Guard installed.
How a Smart Meter Guard is Installed
The great news is that a Smart Meter Guard requires no assembly and is so simple to install that even non-handy people (like me) can do it. And, as long as the security seal is not broken on the smart meter, it is totally legal to install it.
All you have to do is slide the Smart Meter Guard over the glass portion of the smart meter. It will also fit over the metal ring at the base of the smart meter. The metal ring is actually what holds the smart meter in place to your utility box. Then, you simply tighten the securing screw so the Smart Meter Guard fits on snugly and remains secure even in windy situations (note that it does not need to be tight).
That’s it!
The cover will fit 99% of the smart meters on the market today. All you need is a screwdriver to install it, and the 316 stainless steel construction means that the Smart Meter Guard will not rust or corrode and is guaranteed to last 15 years.
The manufacturer of the Smart Meter Guard reports on its FAQ page that there are 3 types of electrical smart meters currently being used. Types 1 and 2 have the metal rings visible on the outside of the utility box. Type 3 has the metal ring at the base of the smart meter and the ring is covered by the metal lid of the utility box. While only about 4% of electrical smart meters are Type 3, if you find that you have one of these rare smart meters, simply request a rubber spacer (free) with your Smart Meter Guard so that it will easily be adjusted to fit this model.
Testing to Make sure Your Smart Meter Guard is Working
The only way to measure that the smart meter radiation is being blocked by the Smart Meter Guard is by using a High Frequency analyzer tuned for the 900 MHz range. The analyzer will measure the power density being emitted from smart meters. While most of us don’t have such a device for testing, this video demonstrates how the Smart Meter Guard drops the radiation down by at least 98% and how this is effective even within the house on the backside of the meter.
The reality is that technology is changing faster than we can adequately assess the long term health impacts. Proactive consumers tend to not take any chances with highly concentrated EMF sources like smart meters and will carefully consider the simple steps required to protect themselves and their families today.
The only problem that the Smart Meter Guard does not solve are the privacy issues that utility companies violate when they monitor and track your electrical usage habits on a 24/7 basis. If this is a concern for you, then by all means continue to seek replacement of your smart meter with an analog meter. In the meantime, however, at least you won’t have to suffer any negative health effects from smart meter radiation as long as a Smart Meter Guard, Smart Meter Cover, or Smart Meter Shield is installed.
Sarah, The Healthy Home Economist
More Information About the Health Dangers of Excessive EMFs
Smart Meter Guard
Are AMR Devices Safer than Smart Meters?
Fitbit Health Dangers
Reducing Exposure to Dirty Electricity
The Health Hazards of Wireless Baby Monitors
Harvard MD Speaks Out about the Health Dangers of Smart Meters
do you know if the smart guard for smart meters shield works or is hype with real people, not their own video? I am a sneior woman who wants one but wants to be sure they really do what they say? thanks so much for your helpful articles.
I am talking about the expensive one for 69.99 on amazon you mentioned top of article thanks
Do you have an EMF meter? I have one so I can test things and it is really handy gadget. This is the model from Safe and Sound Technologies that I use. https://amzn.to/3tuJSOT
Hi Sarah ,
We are moving to new apartment with a smart meter reading on the communal hallway which I am planning to protect as you advised but when I click on the links above it doe not send me to a link to be able to buy smart meter guard . I am in London and I was wondering if you could advise where else I can get this ? And regarding the wall from the inside what would you recommend to get ?
One more question please I read a lot about Himalayan Rock salt lamps and I have one at home next to the internet router but do you think they can help with this smart meter radiation also ?
I do not think a salt lamp will help mitigate EMFs from an internet router.
I do not know where to get a smart meter guard in London. I would call the company and see if there are any distributors in the UK.
All these people that bought the cage and it doesn’t work. Sounds like another rip off!
Yes, it does work … get a meter on Amazon and test it out for yourself.
Problem is we never see the smart meter sheild being tested from the inside of the house next to the smart meter! That way we can see if this is all just a little illusion of safety that costs money and really does nothing
Did you watch the video all the way to the end?? Guess not.
Hi Sarah! I live in a townhome. There are 12 townhomes attached on a 6×6 block. There are 6 meters on one end of the townhomes, and 6 on the other, covering the entire block (hope this makes sense). We are the second house from the end (first home is the one with 6 meters directly attached – getting the brunt of it). So I’m wondering if covering the one meter that measures our home is a futile attempt at protecting ourselves as we will still be subject to radiation from 5 other meters. Would you recommend still covering our meter? I have persistent ringing in my ears at home ? and 9 m/o baby ?
Unfortunately, you are right on. When you are near a bank of smart meters due to living in a townhome or apartment complex, this complicates the problem a great deal.
I would suggest considering a move or consulting with an EMF specialist to figure out how to block things from inside your house by installing a shield on the inside walls of your home.
when will an electronics engineer take apart a smart meter and analyze it for kamikaze circuitry
that can be used for over heating wires white hot instantaneously like a micro frequency wave can, or just burning itself to smitherens…let’s see how smart these things really have been made.
It is illegal to take apart a smart meter installed by a utility company.
ON LessEMF.com , the above mentioned Meter Guard blocks most EMF emitting around the Smart Meter but not behind the Smart Meter into the the house. I think this is an important point that was not mentioned.
Did you view the video link provided in the article which demonstrates the test using an EMF measuring device? The EMFs are blocked behind the smart meter inside the house as well!